A garage door incorporates many hardware parts. When all these parts work in proper sync, your garage door runs well, promoting no mechanical or functional problem. However, sometimes the garage door might not function well without leaving you any clue to find what the real trigger is. That’s frustrating. In this post, you will learn the common reasons your garage door opener or garage door might not work.
Common Reasons Your Garage Door Won’t Open
Here are some common reasons your garage door might not open:
The cables have snapped or popped off
The garage door cables can sometimes become detached. Often, when a torsion spring snaps, the garage door cable snaps too. It can cause injury and harm. If your cables have fractured, call a specialist to help you.
Something blocks the photo eye
Most garage doors have a photo eye which detects if someone or something blocks the door from lowering. The photo eye runs a laser across the range of the garage door. If something interrupts, it will cut off the signal that lowers and raises the door.
Sensitivity needs change
This can take place to both a freshly installed garage door and an earlier one. If you set the sensitivity too low or high, the door won’t open. In Dallas, to avoid hassles hire the professional technicians as they can adjust the close force and limit switch to the correct levels. Thus, you will be good to go!
Your remote control is not functioning well
In Dallas, when your garage door is not opening with the remote, you need to consider a few points that can induce this issue. You might be out of the range or maybe the receiver on the motor is not in a suitable condition or hindered from the signal. Make sure the sensitivity is hanging down from the motor.
You need to adjust the limit settings
If the door lowers but then immediately opens, you must test the limit settings, which maintain the operation determine how far to shift the door to lower it properly. If the settings are not right, the door will lower before the opener believes it should.
The door is off the track
When the door is off trail, it won’t move well. Make sure the door is rolling easily along its metal railing. Check the path for bends, gaps, bumps, or obstacles.
There’s an obstacle you can’t see
Garage doors automatically reverse when hit an obstacle. When the door closes halfway but then reverses for no clear reason, this may be a hint that there is something preventing it from closing, something that you can’t see.
You May Have Put the “Disconnect” Switch On
Every garage door opener comes with a disconnect switch, cord, or knob. These allow you to operate the door manually if the power is cut. Make sure you haven’t unknowingly disconnected the motor.
Therefore, next time you encounter any relevant problem, consider all these above-mentioned conditions. Contact a reputable garage door company for enjoying a comprehensive range of services at competitive rates. They, along with providing you with quick and productive solutions, also offer you great customer support.