Garage door torsion springs counterbalance the weight of the door, helping it open and close smoothly. Because the springs are under high tension, a worn or broken spring can make a garage door difficult or unsafe to operate. If you suspect a spring problem, stop using the door and arrange an inspection by a qualified garage door technician.
Supreme Garage Door Repair provides garage door spring replacement services in the Dallas–Fort Worth area. A technician can inspect the door system, identify the correct spring configuration, and explain the recommended repair.
A torsion spring is typically mounted on a shaft above the garage door opening. As the door closes, the spring winds and stores energy. As the door opens, the spring releases that energy to help counterbalance the door’s weight.
The spring works with other parts of the system, including cables, drums, rollers, and the opener. If a spring fails or the door becomes unbalanced, those components may not operate as intended.
Common signs of a broken or failing spring include:
These symptoms can have other causes, so a technician should inspect the system before recommending a repair. Avoid repeatedly operating the opener when the door is stuck or unbalanced; doing so may add strain to the opener or other hardware.
There is no reliable percentage of visible wear that applies to every garage door spring. Spring service life depends on factors such as the spring’s cycle rating, door weight, usage, and installation. A technician can assess the spring and related hardware to determine whether replacement is needed.
If a door uses two springs and one breaks, the technician may recommend replacing both, depending on their age, condition, and the door’s design. Replacing a matched pair can help maintain balanced operation, but the appropriate repair depends on the specific system.
A replacement spring must match the door system. Technicians consider details such as the door’s weight and height, spring dimensions, wire size, drum and cable setup, and whether the system uses one or two springs. Choosing a spring based only on a visual estimate or a measurement found online can result in an improperly balanced door.
A professional inspection helps confirm the correct parts and allows the technician to check related components, such as cables, drums, bearings, and the opener, for wear or damage.
Torsion spring replacement is a high-tension repair: Torsion springs store substantial mechanical energy. Incorrect handling can cause serious injury or property damage. Do not loosen, wind, cut, or remove a torsion spring yourself, and keep people clear of a door that is stuck or hanging unevenly. Contact a qualified garage door technician for diagnosis and replacement.
A technician should inspect the spring system and the door’s balance, then explain the issue and the recommended repair. After replacement, the technician should check that the door moves properly and that related components are operating as intended. Ask about the replacement spring’s cycle rating, warranty, and any recommended maintenance.
If your garage door is unusually heavy, uneven, or will not open, contact Supreme Garage Door Repair to schedule an inspection. The company also provides related garage door services, including cable, roller, and hinge replacement.
Call (972) 846-9991 or email info@supremegaragedoortx.com to ask about service availability in your area.
Maintaining balanced, fully functional torsion springs is essential for the safety, convenience, and longevity of your entire garage door system. Because these components endure thousands of high-tension cycles over their lifespan, prompt professional attention at the first sign of wear prevents unnecessary strain on your garage door opener and hardware.
When you encounter a broken spring or an unbalanced door, relying on trained technicians ensures the correct spring size, wire gauge, and tension are applied for smooth, long-lasting performance. Protecting your home and family starts with keeping high-tension components in safe working order.
Standard torsion springs are typically rated for 10,000 cycles (one open and close equals one cycle). Depending on how often you use your garage door, this usually translates to roughly 7 to 10 years of average daily operation.
Torsion springs are typically installed at the same time and undergo identical cycle wear. When one breaks, the second spring has reached the end of its useful lifespan as well and is likely to fail shortly after.
It is strongly discouraged. Without the counterbalance of a working spring, a standard residential garage door weighs 150 to 300+ pounds, making manual lifting extremely dangerous and likely to cause injury or door damage.
No. Torsion springs store extreme mechanical tension. Winding or unwinding them without specialized tools and training can cause severe injury or property damage. Replacement should always be handled by a professional.
Installing an incorrectly sized spring will disrupt the balance of the door. An under-sized spring makes the door too heavy for the opener, while an over-sized spring will prevent the door from staying closed, causing safety risks and gear failure.
Regular maintenance helps prevent premature rust and wear. Applying a light silicone or white lithium-based lubricant to the coils 2–3 times a year keeps the spring winding smoothly without binding.
Torsion springs store massive amounts of potential energy when wound tight. When the steel fractures under fatigue, that stored energy releases instantly, creating a sound similar to a gunshot or fireworks display.
A qualified garage door technician can typically complete a standard torsion spring inspection, removal, replacement, and balance test in about 45 to 60 minutes.
If your garage door is heavy, noisy, or won't lift, let our experts safely inspect and replace your springs with proper, heavy-duty components.
Schedule Spring Service
We use cookies to improve the site, measure performance, and personalize advertising.